LED Trafo 12V 24W, LED Netzteil Transformator 1-24W LED Treiberadapter 12V DC 2A - Konstante Spannung für LED Lichtbänder, Schrankleuchten, LED Anzeige und LED Glühbirnen G4, MR11, MR16

Toller Artikel. Macht was er soll.

Heinz Nitsche

Kundenrezension aus Deutschland 🇩🇪 am 12. Februar 2023

Größe: 60WVerifizierter Kauf

Sehr leicht zu installieren, da Anschlüsse auf dem Trafo sehr gut angezeigt sind.. Trafo kann fast überall eingebaut werden da er klein ist. Habe ihn in der Decke verbaut um Deckenstrahler von Halogen auf LED umzubauen. Funktioniert einwandfrei. Super Trafo zu gutem Preis.

Kundenrezension aus Deutschland 🇩🇪 am 3. März 2023

Größe: 60WVerifizierter Kauf

betreibe 3 LED Lampen damit, gute Helligkeit, bin zufrieden

LEDs flackern nicht, bisher alles gut

wolleauswob

Kundenrezension aus Deutschland 🇩🇪 am 2. März 2023

Größe: 60WVerifizierter Kauf

funktionieren bisher ohne Probleme; habe Halogen gegen LED getauscht!

Gerald

Passt und funktioniert

Kundenrezension aus Deutschland 🇩🇪 am 21. Februar 2023

Größe: 60WVerifizierter Kauf

Passt und funktioniert perfekt
leichte Zeitverzögerung beim Ausschalten , was aber nicht stört

Kundenrezension aus Deutschland 🇩🇪 am 6. Februar 2023

Größe: 24WVerifizierter Kauf

Habe das Trafo für meine LED Leiste bestellt und bin sehr zufrieden die Montage war sehr leicht wenn man das nötige wissen hat. klare Kauf Empfehlung.

Kundenrezension aus Deutschland 🇩🇪 am 29. November 2022

Größe: 60WVerifizierter Kauf

Günstig und sehr gute Qualität

Alle Rezensionen ins Deutsche übersetzen

Spitzenrezensionen aus anderen Ländern

John Boy

Terminal covers need modification

Kundenrezension aus Großbritannien 🇬🇧 am 26. September 2020

Größe: 24WVerifizierter Kauf

These appear to be well constructed. However, the terminal covers and terminal area need modification:
* the AC live and DC positive terminals are in line, but the positive symbols on the terminal covers are on opposite sides;
* the mains input terminals are only suitable for flex and then it's easy to confuse the input and output with the risk of connecting the DC output to the AC mains - I did;
* it is designed for cord grips but this weren't fitted - it relies on a slightly serrated section in the terminal cover - but the gap for most flexible cords is too small so that the terminal cover stands proud.

8 Personen fanden diese Informationen hilfreich

Wookeyhole

Did not do what I was hoping

Kundenrezension aus Großbritannien 🇬🇧 am 9. März 2022

Größe: 60WVerifizierter Kauf

I bought this to supply three 12V 20W halogen lamps but when it was connected I could not get any output voltage from the unit so I sent it back for a refund. I don't know if the unit was faulty or if it was not intended to supply halogen lamps. Although it says "LED Power Supply 60W LED Driver Adapter 12V DC 5A" in the description I thought it would power those halogen lamps which on the face of it did meet the "60W 12V DC 5A" description. However there may be a technical reason why this unit is not designed to supply halogen lamps.

Conclusion:
If you want a transformer to supply halogen lamps make sure that it is designed for that purpose.
If there is a technical reason why all these 12V LED transformers cannot be used to supply 12V halogen lamps the manufacturers should make this very clear in their advertisements.

Kindle Customer

All right so far...

Kundenrezension aus Großbritannien 🇬🇧 am 2. April 2022

Größe: 24WVerifizierter Kauf

I've only recently installed two of these, hence the lower star rating: I've no notion of their longevity. They work, and having the Input and Output terminals at opposite ends is good. Beware the little plastic blue covers with their handy '+' labelled tabs - to help you with polarity? No. They are wrong - or one of them is. Take the polarity from the markings printed on the body of the transformer. You might need your best glasses, but these are correct.

2 Personen fanden diese Informationen hilfreich

Joel

Not the best built, but works fine

Kundenrezension aus Großbritannien 🇬🇧 am 22. November 2020

Größe: 60WVerifizierter Kauf

In operation, after a few hours it appears to be fine.
One of the cable grip screws broke in two when being tightened. It's in to plastic and so I couldn't and wouldn't overtighten - otherwise it'd strip out the plastic it taps in to - so they must be pretty soft.
The input and output connecting points flex and twist when cables are being screwed in, which isn't reassuring and, particularly on the mains input side, the cable entry is too small - even 3 amp mains cable was too much of a squeeze to get the grip to set flush.
The plastic back panel isn't flat so it rests on the centre and rocks from side to side on a flat surface.
It's working OK but build and attention to detail all tastes a little...unsatisfactory.

Eine Person fand diese Informationen hilfreich

Danny Broadbent

Simple and easy to install

Kundenrezension aus Großbritannien 🇬🇧 am 30. März 2021

Größe: 60WVerifizierter Kauf

We used this along with a DC Bluetooth 5.0 Amp Board, to connect our ceiling speakers to our lighting circuit (separate light switch to turn bluetooth on / off).... all works well and now our speakers are provided with more power and are now much louder than before. We done this to replace our existing iStar (Bluetooth 4.0) ceiling speaker kit, which we have a couple of Yamaha ceiling speakers connected, however the iStar just wasn't up for the job, as the bluetooth kept dropping out, causing a noticeable sound delay (when watching films in the lounge), and causing a stutter, etc, however our workshop iStar (with Q Acoustic speakers) would just stop playing music after 5 minutes, or the stutter would kick in.... so being able to connect this high amp / watt transformer has helped us use a better Bluetooth module that can also provide higher watts to our speakers, which I feel the speakers really needed it.

22 Personen fanden diese Informationen hilfreich